ASTM A53 GR A welded steel pipe/tube
ASTM A53 grade A specification for General Requirements for Specialized Carbon and Alloy Steel Pipe.
ASTM A53 grade A alloy pipe uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging.
The size of A53 Grade A carbon steel pipe/tube
ERW; outer diameter:21.3-660mm thickness:6-25mm
LSAW; outer diameter:325-1524mm thickness:6-50mm
SSAW: outer diameter:219-3200mm thickness:5-25mm
A53 Grade A material chemical composition
| Material | C | Mn | P | S | Cu | Ni | Cr | Mo | Van
|
| Grade A | Electric-resistance-welded | ||||||||
| 0.25 | 0.95 | 0.05 | 0.045 | 0.50 | 0.40 | 0.40 | 0.15 | 0.08 | |
| Furnace-welded pipe | |||||||||
| 0.30 | 1.20 | 0.05 | 0.045 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 | |
Electric-Resistance-Welded Pipe—Pipe produced in single lengths, or in multiple lengths from coiled skelp and subsequently cut into individual lengths, having a longitudinal butt joint wherein coalescence is produced by the heat obtained from resistance of the pipe to the flow of electric current in a circuit of which the pipe is a part, and by the application of pressure.
Furnace-Butt-Welded Pipe, Continuous Welded Pipe—Pipe produced in multiple lengths from coiled skelp and subsequently cut into individual lengths, having its longitudinal butt joint forge welded by the mechanical pressure developed in rolling the hot-formed skelp through a set of round pass welding rolls.
ASTM A53 Grade A weld alloy pipe/tube mechanical properties
| Material | Tensile strength,min,psi(mpa) | Yield strength, min, psi [Mpa] | Elongation in 2 in. or 50 mm |
| Grade A | 48 000 [330] | 30 000 [205] | A,B |
A The minimum elongation in 2 in. [50 mm] shall be that determined by the
following equation:
e5625 000 [1940]A0.2/U0.9
where:
e = minimum elongation in 2 in. or 50 mm in percent, rounded to the nearest
percent,
A = the lesser of 0.75 in.2[500 mm2] and the cross-sectional area of the
tension test specimen, calculated using the specified outside diameter of
the pipe, or the nominal width of the tension test specimen and the
specified wall thickness of the pipe, with the calculated value rounded to
the nearest 0.01 in.2[1 mm2], and
U = specified minimum tensile strength, psi [MPa].
Shanghai Katalor Enterprises Is the ASTM A53 Grade A steel pipe distributor and stockist,In addition,we have Machining equipment for steel pipe deep processing, we focus on seamless steel pipe(Line pipe,Pipe for structures,Boiler Pipe,Pipe for conveyance of fluid), Welded steel pipe (general welded circular tube,square tube,Rectangular tube).if you need ASTM A53 Grade A weld alloy pipe/tube supplier,ASTM A53 Grade A weld alloy pipe/tube exporter,contact us!
