ASTM A334 Grade 6 Welded Carbon and Alloy-Steel Tubes/pipes
A334 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service.
ASTM A334 Grade 6 steel pipe specification covers several grades of minimum wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
ASTM A334 Grade 6 alloy pipe/tube chemical composition
| Element | Carbon, max | Manganese | Phosphorus, max | Sulfur, max | Silicon | Nickel | Chromium | Copper | Aluminum |
| Grade 6 | 0.30 | 0.29–1.06 | 0.025 | 0.025 | 0.10 |
A334 Grade 6 Carbon and Alloy-Steel Tubes/pipes mechanical properties
| Grade 6 | ||
| ksi | MPa | |
| Tensile Strength, min | 60 | 415 |
| Yield Strength, min | 35 | 240 |
| Elongation in 2 in. or 50 mm (or 4D),min, %: | ||
| Basic minimum elongation for walls5/16 in. [8 mm] and over inthickness, strip tests, and for allsmall sizes tested in full section | 30 | |
| When standard round 2-in. or 50mm gage length or proportionallysmaller size specimen with thegage length equal to 4D(4 timesthe diameter) is used | 22 | |
| For strip tests, a deduction for each1/32 in. [0.8 mm] decrease in wallthickness below 5/16 in. [8 mm]from the basic minimum elongation of the following percentagePoints | 1.50B | |
A Elongation of Grade 11 is for all walls and for small sizes tested in full section.
B The following table gives the calculated minimum values
Katalor Enterprises is a professional ASTM A334 Grade 6 carbon and alloy welded pipe/tube supplier in China. If you have any demands for ASTM A334 Grade 6 carbon and alloy welded pipe/tube, please do not hesitate to contact with us .
We can supply ASTM A334 Grade 6 carbon and alloy welded pipe/tube dimension
ERW; outer diameter:21.3-660mm thickness:6-25mm
LSAW; outer diameter:325-1524mm thickness:6-50mm
SSAW: outer diameter:219-3200mm thickness:5-25mm
