EN10297-1 C45E seamless steel pipe/steel tube
C45E seamless steel pipe/steel tube is one kind of high strength carbon steel pipe, which is mainly used for construction and machining after quenched and tempered .
C45E seamless steel pipe/steel tube is a cold finished steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. The cold finished process increases the tube's physical properties and offers better tolerances and reduced machining allowances than hot finish seamless pipe.
C45E seamless steel pipe/tube Chemical Composition
| C | Si | Mn | Ni | P | S | Cr | Mo |
| 0.42 - 0.5 | max 0.4 | 0.5 - 0.8 | max 0.4 | max 0.03 | max 0.035 | max 0.4 | max 0.1 |
C45E seamless steel pipe/tube Mechanical properties
| Steel Grade | Yield Strength(ReH)Mpaa | Tensile Strength(Rm)Mpa | Elongation A% | |||||||||
| Wall thickness For T in mm | Wall thickness For T in mm | ≤16 | ＞16≤40 | ＞40≤80 | ||||||||
| ≤16 | ＞16 ≤40 |
＞40 ≤80 |
≤16 | ＞16 ≤40 |
＞40 ≤40 |
|||||||
| l | t | l | t | l | t | |||||||
| C45E | 340 | 305 | 305 | 620 | 580 | 580 | 14 | 12 | 16 | 14 | 16 | 14 |
C45E seamless steel pipe/tube applications
C45E seamless steel pipe/tube is applied to manufacture high strength movement parts, such as air compressor, piston pump, the impeller of a steam turbine, heavy duty and general machinery of the rolling shaft, connecting rod, worm, rack, gear, etc.
C45E seamless steel pipe/tube Surface treatment
surface is fine finish, inner wall is well cleaned, there is no oxide layer on inner and outer surface.
Katalor Enterprises is a professional C45E seamless steel pipe/tube manufacturer, if you need C45E seamless steel pipe/tube machining service , you can contact katalor !
