ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.Seamless and Welded Steel Pipe size for Low-Temperature Service:
A333 Grade 6 steel pipe specification:
Outer Dimensions: 19.05mm – 114.3mm
Wall Thickness:2.0mm – 14 mm
Length: max 16000mm
A333 Grade 6 steel pipe tensile requirements
Data | ASTM A333 Grade 6 |
Tensile strength, min, psi (MPa) | 60 000 (415) |
Yield strength, min, psi (MPa) | 35 000 (240) |
A333 Grade 6 steel pipe Packing: Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
A333 Grade 6 steel pipe Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
A333 Grade 6 steel pipe Heat Treatment
Product is supplied in the normalized, 1500 f and air cooled, condition. It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling.