1025 steel is a Standard grade Carbon Steel. Higher carbon plate for greater strength. Has optimal combination of strength, weldability and good form retaining after machining.
Similar to 1020,1025 is a low- to medium-carbon alloy appropriate for general engineering and construction applications. Offering good machinability,1025 can be normalized, hot- and cold-worked, or water quenched and tempered.
1025 steel Chemical Composition
| Material | |
| Chemical Composition | |
| C | 0.22-0.29 |
| Si | 0.17-0.37 |
| Mn | 0.50-0.80 |
| Cr | 0.25 |
| Ni | 0.30 |
| P | ≤0.030 |
| S | ≤0..030 |
| Cu | 0.25 |
| Ti | - |
Machinability of 1025 steel:
Readily machined
Annealed
Normalized
Cold-drawn
Quenched, tempered
Good surface finish may be compromised from tearing when annealed and normalized
Workability of 1025 steel:
Hot roll or forge from 1800° to 2300°F (982° to 1260°C)
Intermediate annealing required for substantial cold work
Fully anneal when further cold work will follow extensive cold work
Shanghai Katalor Enterprises, as a 1025 steel Manufacturer , can supply 1025 steel. We also can provide 1025 steel machining services, so if you need 1025 steel stock or machining parts , you can also contact katalor !
