ASTM A333 Grade 10 Welded Steel Pipe Mechanical Properties
ASTM A333 grade 10 material chemical composition
Element |
Carbon, max |
Manganese |
Phosphorus, max |
Sulfur, max |
Silicon |
Nickel |
Chromium |
Copper |
Aluminum |
|
Grade 10 |
0.20 |
1.15-1.50 |
0.035 |
0.015 |
0.10-0.35 |
0.25max |
0.15max |
0.15max |
0.06max |
ASTM A333 Grade 10 Welded Steel Pipe/tube mechanical properties
|
|
Grade 10 |
|
|
|
Psi |
MPa |
|
Tensile strength, min |
80 000 |
550 |
|
Yield strength, min |
65 000 |
450 |
|
|
Longitudinal |
Transverse |
|
Elongation in 2 in. or 50 mm, (or 4D), min, %: |
|
|
|
Basic minimum elongation for walls5 ⁄16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section |
22 |
-- |
|
When standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used |
16 |
-- |
|
For strip tests, a deduction for each1 ⁄32 in. [0.8 mm] decrease in wall thickness below5 ⁄16 in. [8 mm] from the basic minimum elongation of the following percentage |
1.25 |
-- |
ASTM A333 Grade 10 Welded Steel Pipe Surface treatment
Black painting
Varnish painting
3PE
Hot galvanized
or other coating according to your requirements
Bare tube
ASTM A333 Grade 10 Welded Steel Pipe Inspection
Ultrasonic examination, eddy inspection, hydrosttic testing etc.
ASTM A333 Grade 10 Welded Steel Pipe Application
The transportation of fluids in the projects and big equipments, for example transport of water, oil, gas etc.Can be used in low and medium pressure boiler for the transportation of fluids, for example steam tube, big smoke tube, small smoke tube, generating tube etc.
